Code Alarm PC 4400 Owner's Manual page 11

Using Your Selectable Options
A. What is Personalized Transmiiters option
Personalized Transmmiter's when selected will active an auxilary
when the unit recieves an unlock command from the tranmitter.
This function would be used to activate memory seats or any
other device that you wanted activated when unlocked .
B. How do Personalized Transmitters work??
Any Transmitter's that are learned as #1 will Activate (AUX) Three
(3). When an unlock command is recveived
Any Transmitters that are learned as #2 will Activate (AUX) four (4).
Whenver a unlock command is recieved.
9. What is Turbo Timer Option?
In order for this function to work properly the Neutral safety
Turbo Timer is a selectable option on the PC 4400 that will allow
your vehicle to remain running after the consumer has exited for
5 Minutes.
To achieve this feature you must have the option selected and a
tach programmed (unless tachless is selected)
10. How to activate Turbo Timer
1. The option must be selected & Car Start harness must be
installed
2.The module must see neutral safety change state from Drive to
park.
3.Push and hold brake for 5 seconds
4.Turbo Timer will activate and run for 5 minutes
IMPORTANT!
must be installed correctly
11