Table of Contents
Advertisement
(1) Press Enter; an alphanumeric window appears
with a highlighted number/letter corresponding
to the character
presently
being used.
(2) Using the UpIOown wheel
key.
highlight the first
10
character
desired
and
press
Enter.
The first
character changes and the cursor moves to
the second character position
.
(3) Repeat step (2) for the second desired
character;
the cursor moves to the third character
position.
(4) Repeat step (2) for the third through eighth
character, if used; then press Enter.
.OtT
us.", to
~1l.I~E!!.
US<
1i"T&A
tufTott
TO
aolT.
u" .....
lNTTottS TO
<H_
SAllE
CANCEL
" " " 10
IlUD
SAVE
CANCEL
(5) Using the UplDown wheel
key,
highlight SAVE at the bottom of the screen and press
Enter to save the user 10 code just
entered.
The Setup page reappears.
c.
CONTRAST - Press the wheel key switch upor down to highltght the CONTRAST
item;
then press
Enter.
A popup menu appears with a contrast level between 1 and 10 high
lighted; the level also appears in
the
status bar
at
the bottom of the
display.
Use the
Up/Down wheel key to select the desired display contrast for the LCD. Set the contrast at
about halfway (4 or 5) for best display. Press Enter to confirm the
selection.
d. BACKLIGHT - Press the wheel key switch up or down to highlight the BACKLIGHT
item; then press Enter. A popup menu appears with the backlight duration (or none)
highlighted; the selection also appears in the status bar at the bottom of the display.
Use the Up/Down position of the wheel key switch
10
select thelCO backlight feature
OFF.
15 SEC.
lOSEC.
1M1N or STAY ON as indicated in the bottom status
bar.
Press
Enter to confirm the
se~ion.
N01'E;
Be mindful that use 01
the
backlighting feature for longer periods of time will
deplete battery power more
quickly.
e.
PWR SAVE - Press the wheel key switch up or down to highlight the PWA SAVE
item;
then press Enter. A popup menu appears with the current selection
highlighted;
the
selection also appears in the status bar at the bottom of the display. Use the Up/Down
position of the wheel key switch to select the desired power save option at OFF, SHORT
(3 seconds) or LONG (5 seconds) as indicated in the bottom status
bar.
Press Enter to
confirm the selection.
f.
KEY BEEP - Press the
wheel
key
switch
up or down to hlghltght the KEY BEEP
item;
then press
Enter.
A popup menu appears with the current selection htghltghted; the
selection also appears in
the
status bar at the bottom of the
di~ay.
Use the Up/Oown
position of the
wheel
key switch to tum the key beep ON
or
OFF as indicated
in the
bottom
status
bar.
Press the Enter button to confirm the
selection.
g.
8m
VERSION - This menu line, when
highlighted,
indicates the current SoftWare
version incorporated into the unit.
Adjusting the Volume:
This adjustment applies to the radio modes
only.
1.
With the unit
in
the RDO ONLY or GPS + RADIO standby mode (standby page
displayed),
use
the Up/Oown wheel key in the up or down position; a VOL bar graph display
appears.
19
Advertisement
Table of Contents
