Table of Contents
Advertisement
Using the Web site
Deleting Sources and Managing Sensors
You may want to delete sensors and their widgets from
the source list and/or dashboard. You can add them
back to your sources list at a later time if you wish. This
function allows you to "ignore" a sensor that your bridge
is receiving that you have no interest in.
PLEASE NOTE that the specific sensor history data and
charting will be ERASED from the server if you click the
red "X" button to remove it from the "My Sources" list.
Click on the "X" button to delete the
sensor and all of itʼs widgets from the
sources list and dashboard.
14
Getting to Know the Widgets
For each battery powered sensor there is at least one
widget that will show a specific weather category. Some
sensors will have more than one widget. For example, a
5-in-1 sensor will have a separate widget for wind speed
and direction (shown below), temperature, humidity and
rain.
close widget
widget
(remove
title
from view)
My Bridge - Wind
most
recent
readings
time/date
of most
recent
reading
chart
button
Acu-Link Tip
The 5-in-1sensor wind widget is shown here, there will be little differences
between the widgets, such as temperature widgets having a recorded
"low" instead of an "average". Also note that the widgets do not
automatically refresh, so refresh your browser to see the latest readings.
sensor wireless
units
reception strength
today/week
records toggle
recorded
high
reset records
recorded
average
alarm button/
indicator
sensor settings
button
15
Advertisement
Table of Contents
