Prepare The Bridge For Registration - AcuRite 9150 Instruction Manual

Connect
Step 3. Wait for the bridge to start up
After connecting the power and Ethernet cable, the
Acu-Link Internet Bridge may need up to 30 MINUTES to
start up and automatically download the latest software
before it can register with the server.
WAIT
STATUS
LIGHT 2
STEADY
STATUS
MAY TAKE
LIGHT 1
UP TO
BLINKING
30 MINUTES
After plugging in the AC adapter the bridge will automatically
perform the following boot operations:
Startup Sequence duration
1
Initial Boot
seconds
2 Downloading
5 to 30
firmware from
minutes
Acu-Link server
3 Re-Booting
seconds
4 Ready for Use
READY
READY
STATUS
LIGHT 2
BLINKING
STATUS
BOTH LIGHTS
LIGHT 1
ALTERNATING
BLINKING
BLINKING
STATUS LIGHT 1 STATUS LIGHT 2
30
STEADY STEADY
BLINKING
STEADY
RAPIDLY
30
STEADY STEADY
BLINKING BLINKING
RAPIDLY RAPIDLY
6
Step 4. Prepare the Bridge for Registration
The Acu-link Internet Bridge will transmit your weather
information to the secure AcuRite servers. From there you
will be able to view and track this information via the
web site or by downloading and using the Acu-Link APP
for iPhone and Android smart phones, we will cover that
later.
Before you can access all this wonderful information, you
must first "make the connection" by registering your
bridge.
1. Make sure that BOTH status lights are blinking rapidly.
2. Press AND HOLD the "REGISTER" button on the
bottom of the Acu-Link Internet Bridge for 4 SECONDS.
BLINKING
Acu-Link Tip
Press the "REGISTER" button only once during initial installation. DO NOT
PRESS THE REGISTER BUTTON AGAIN AFTER YOUR BRIDGE HAS BEEN
SUCCESSFULLY REGISTERED, or you will lose previously stored weather
data and have to register again!
BLINKING
7