Table of Contents
Advertisement
Intra-BSS traffic blocking
This option blocks clients in the same BSS from communicating with each other. (Layer 2 Isolation)
Device Control
This section has functions that will allow the TT5800/TT2400 to Reboot and Reset the system configuration to factory
defaults.
Firmware Upgrade
This section allows the TT5800/TT2400 firmware to be upgraded or changed directly from the web interface. Click on
the Browse button to select a file from the host machine.
Register
The TT5800/TT2400 has implemented a hardware modification authorization process to prevent use by fraudulent
hardware from other manufacturers. This will require any hardware change on the radio card used on the
TT5800/TT2400 to input a serial code generated based on each unique MAC address. Please contact Teletronics
Support to a pickup a valid serial number to deactivate the pre-registration protection after a radio card swap. If the unit
is not registered some features such as SSID and Wireless Channel selection will be disabled.
46
Advertisement
Table of Contents
