WLB36B_ManualEN_080907.qxp
OPERATING THE UNIT CORDED
Insert the Adapter's DC Connector of the AC/DC Charging/Power Adapter into
the 12 Volt DC Charging Port. Insert the plug end into a (powered) standard
North American 120 Volt 60Hz outlet. Operate the unit as outlined in the
previous section.
RECHARGING THE UNIT
Insert the Adapter's DC Connector of the AC/DC Charging/
Power Adapter into the 12 Volt DC Charging Port. Insert the
plug end into a (powered) standard North American 120 Volt
60Hz outlet. The red Charging Indicator LED will light to indicate
the unit is charging.
Notes: Do not charge for longer than 8 hours. Charge or power
This unit ONLY with the originally supplied Class 2 transformer.
Consult manufacturer for replacement.
USING THE HANGING HOOK
The 360° Swivel Hanging Hook allows you to position the Bright Bar
convenient, hands-free operation.
CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:
• When Hanging Hook is in use, do not shake light.
• When light is hung by the Hanging Hook, do not shake the light or object
that it is hanging from. Do not hang the light from any electrical wires or
anything that it is not secure.
• Only use the Hanging Hook for hanging the Bright Bar
not intended to support additional weight. Do not attach or hang anything
additional to the light or risk of breakage may occur.
8/9/2007
10:16 AM
Page 5
™
for
™
. The Hanging Hook is
5
CARE AND MAINTENANCE
Safe Battery Disposal
This unit contains a nickel metal hydride rechargeable battery,
which which must be must be disposed of properly when it will
no longer retain a charge. For information on recycling this
battery, call toll-free (877) 822-8837.
WARNINGS: TO REDUCE THE RISK OF INJURY / EXPLOSION
• Do not dispose of product in fire as batteries inside this product may
explode or leak.
• Do not expose the unit containing a battery to fire or intense heat as it
may explode.
For assistance with your product, visit our website www.blackanddecker.com
for the location of the service center nearest you or call the BLACK & DECKER
help line at 1-800-544-6986.
Accessories
Recommended accessories for use with your tool are available from your local
dealer or authorized service center. If you need assistance regarding
accessories, please call: 1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this
tool could be hazardous.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool service. Whether you
need technical advice, repair, or genuine factory replacement parts, contact the
Black & Decker location nearest you. To find your local service location, refer
to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or
visit www.blackanddecker.com
6