Touch Board
SET UP
This chapter covers:
Installing WorkSpace
Mounting the Touch Board
Connecting the Video Projector
Connecting the Touch Board via USB
Calibrating the Touch Board via Device Manager
Calibrating the Touch Board (Windows 7 and Windows 8)
Installing WorkSpace
You must have administrative privileges to install WorkSpace. If you do not have administrative privileges on your computer,
contact your IT department.
Prerequisites
The WorkSpace disc and Content disc are required unless the software is downloaded from
http://www.turningtechnologies.com/responsesystemsupport/downloads.
PC and Mac
1
Insert the WorkSpace disc into the DVD drive. If the disc does not auto-run, navigate to your disc drive and double-click
the auto-run.exe file.
2
Follow the on-screen prompts to proceed through the installation process.
3
Repeat steps 1 and 2 using the WorkSpace Content disc.
4
Restart your computer to complete the installation process.
After the installation, a shortcut for the software will appear on the desktop and the Turning Technologies
appear in the notification area (PC)/Menu Extras area (Mac).
Linux
1
Login as "root" or "sudo."
2
Insert the WorkSpace disc into the DVD drive. Double-click the DVD icon that appears on the desktop.
3
Under Permissions, select Allow executing file as program.
4
Follow the on-screen prompts to proceed through the installation process.
After the installation, the software can be found in Home\eInstruction\WorkSpace\WorkSpace.
5
Repeat steps 1 - 4 using the WorkSpace Content disc.
6
Restart your computer to complete the installation process.
turningtechnologies.com/user-guides
6
icon will
Need help?
Do you have a question about the Touch Board and is the answer not in the manual?