Setting Up Multi-User Mode - Turning Technologies Touch Board User Manual

Touch Board
Toggle Multi-User Mode on and off using the Multi-User option.
l
Add, remove and move Mobi tablets to different areas using Edit Devices. Each multi-user page will remember specific
l
device placement when moving between pages or returning from Mouse Mode.

Setting Up Multi-User Mode

1
Connect up to nine devices in Device Manager.
IMPORTANT
Do not add the device that will be used to control the main toolbar or the other devices unless it is
set to "presenter" within Device Manager. Refer to
2
Click the Multi-User Menu
3
Select Multi-User Page Setup.
The Multi-User Page Setup window opens.
4
Select either a Collaborative or Defined work area.
Collaborative - When this option is selected, all devices will be able to work within the same area.
Defined - When this option is selected, two devices will work within their own defined space.
Defined - When this option is selected, up to four devices will work within their own defined space.
Defined - When this option is selected, up to six devices will work within their own defined space.
Defined - When this option is selected, up to nine devices will work within their own defined space.
5
Drag and drop a device to the area needed.
NOTE
It is recommended to leave one device out to keep control of all users. Ideally, this will be the
"presenter" device.
6
Click OK after all devices have been dropped into place.
turningtechnologies.com/user-guides
icon on the Page Functions toolbar.
Selecting the Presenter on page 16.
15