Accessory And Hose Storage - RIDGID WD19560 Owner's Manual And Fitness Manual

SP6731-1 16 Gallon E S
Operation (continued)
1. Locate blowing port of your Vac.
2. Insert the locking end of the Dual-
Flex™ Locking Hose into the blowing
port of the Vac. The hose should snap
into place. To remove the hose from
the Vac, press the release button in the
hose assembly and pull the hose out of
the Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose, then place the
car nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Accessory and Storage
Your accessories may be stored in the
removable tote, or in the two locations on
the caddy right/left. Either the hose or the
wands may be stored in the two areas
marked Hose Storage.
The hose may be stored by wrapping it
around the unit and plugging the open end
into one of the storage locations on the
caddy assembly. Alternatively, the wands
may also be stored in this location by
plugging either of the ends of the wands
onto the storage receivers located on the
caddy.
2/3/12 2:06 PM Page 12
Dual-Flex
Locking
Hose
Extension
Wand
(Optional)
12
Blowing
Port
Swivel
End of
Hose
Car Nozzle (Optional)
Accessory
Storage
Compartment
Extension
Wand
Storage
e
H o s
e
r a g
S to
e
e
g
s
r a
o
t o
H
Hose Storage
S
Area