Add Preset Points; Preset Point Sequence View - Planet Networking & Communication NVR-420 User Manual

7.2.1 Add preset points

Move the selection focus to the "Add preset point" icon and press the "ENTER"
button on the remote will add the current live video as a preset point.

7.2.2 Preset point sequence view

Once you have multiple preset points added, press the "Down" button on the
remote to select the "Preset point sequence view" icon. Press "ENTER" button on
the remote to start sequence view between previously added preset points. Press
"ENTER" again to stop.
When the focus is on "Preset point sequence view" icon, press the "Right" button
will move the focus to the preset point sequence view interval drop-down menu.
Press the "ENTER" button on the remote will pull down the menu and use "Up"
and "Down" buttons on the remote to move between selections. Press the
"ENTER" button again to make the selection.
84