Table of Contents
Advertisement
Simply use the directional buttons on the remote to move between the keys on
the virtual keyboard. If you have a USB mouse plugged into the NVR, a mouse
cursor will appear on the screen and you can use the mouse to select keys on the
virtual keyboard as well. Press the "ENTER" button on the remote to make the
selection.
Enter the default username "admin" by using the virtual keyboard. When done,
select the "Enter" button on the virtual keyboard and the focus should be moved
to the password field.
After the default password "admin" is entered as well, select the "Enter" button
on the virtual keyboard again and the focus should be moved to the "Log in" icon.
Press the "ENTER" button on the remote to log in.
Turn on Audio
The local UI is capable of playing audio coming from the camera side, but It's not
77
Advertisement
Table of Contents
