ADInstruments AD-160 User Manual page 22

IP Receiver
x
ƒ
Enable: When the programs are from IP source, select on.
ƒ
Protocol: Optional UDP and RTP according to your IP source.
ƒ
Enablechannel: When the programs are from IP source, select on.
ƒ
MulticastAddress: Set up the multicast IP address for receiving the IP signal.
ƒ
MulticastPort: Set up the UDP port for receiving the IP signal.
Other parameters: Default setting.
Transmitter
x
ƒ
ChannelSelect: Set up the IP channel number where you want to transmit
programs.
ƒ
EnableChannel: Enable or disable the IP channel.
ƒ
Protocol: Optional UDP or RTP according your requirement.
ƒ
EncapNum TSPackts: Configuration range is 1—7. (Number 7 is
recommended).
ƒ
TypeOfService: It includes Normal, Min delay, Monetary cost, Max reliability,
Max Throughput,.
ƒ
TimeToLive: Configuration range is 1-255. (Number 8 is recommended).
ƒ
IPDestAddress: Set up the IP channel‟s multicast IP address for broadcasting
the IP signal.
ƒ
UDPDestPort: Set up the UDP port for the IP signal.
Other parameters: Default setting.
Note:
AD160 HD Integrated Receiver Decoder User Manual
AD Instruments
22