ADInstruments AD-160 User Manual page 18

there‟re two parts used to display some correlative information, just as the following
picture.
¾ Main Board
x SOURCES
In this submenu, there are three options, TUNER, ASI and IPTV.
ƒ TUNER: when select this item, the receiver will search the signal from the
tuner, different IRD model may have different NMS interface and operation.
ƒ ASI: when select this item, the receiver will search the signal from the ASI
input port.
ƒ IPTV: when the signal from the IP port, you can select this item.
x Tuner selection
In this item, you can set the parameters according to different tuner model, DVB-S
(QPSK), DVB-S2 (8PSK), DVB-C (QAM) and DVB-T (COFDM).
According to your IRD model select correct tuner. Then setup parameters of frequency,
symbol rate, LNB Voltage, LNB 22KHz, QAM model, bandwidth and so on. You can
get these parameters from your program provider.
x CI MultiDecrypt Mode
ƒ MultiPMT: it‟s the default option, you needn‟t change it generally.
ƒ CombinePMT: if your CAM can‟t decrypt programs normally, you can try
to select it.
x Program List
AD160 HD Integrated Receiver Decoder User Manual
AD Instruments
18