ADInstruments AD-160 User Manual page 19

ƒ Refresh: update the programs from the input signal.
ƒ Default: get all the programs‟ Operation back to „Bypass‟.
In the programs list box, all the received programs will be list. There are three item
providing the programs information: Number, Name and Operation. Let‟s take Channel
[V] (NO.21) for example to explain how to edit the programs.
Click the program which you want to edit (in the picture, it is Channel [V], NO.21), and
then this program will be highlighted in blue, program number will show in "Program
Number" item. Then click the down list menu in the "program operation" item to select
the status you need.
Explain:
9 Bypass: Transmit the program without any disposal.
9 CI slot1: If the program is scrambled, you can appoint the CAM card
inserted in Slot 1 to descramble it. Under this condition, the program is
transmitted in default.
9 CI solt2: If the program is scrambled, you can appoint the CAM card
inserted in Slot 2 to descramble it.. Under this condition, the program is
transmitted in default.
9 Delete: Any program you don‟t want to transmit can be forbidden by
selecting this status.
x Play List
In this box, select the programs you want to play via AV interface, and then click
"SendData" button to save the parameters, the programs you select will be played.
x Playing program
The information of the program played currently will appear here, such as PMT PID,
Video PID, Audio PID and so on.
Notice: After setting all the parameters for each page (including the following 6
pages), you should press 'SendData' to enable the new parameters.
¾ Audio/Video
AD160 HD Integrated Receiver Decoder User Manual
AD Instruments
19