Desa G8001 SERIES Installation Instructions

G8001 SERIES BRICK LINER KIT
IMPORTANT: Read entire instruction sheet before install-
ing brick liner.
This brick liner accessory is approved for use in the
following models: VTGF33 series, (CG)EFP33 series,
VSGF28 series and VYGF33R series vent-free gas fire-
place systems. Do not use brick liner accessory in any
other fireplace models.
The Brick Liner Kit contains the following:
• 1 - Rear Firebrick Panel
• 2 - Side Firebrick Panels
• 3 - Retainer Brackets
• 3 - #10 Screws
Tools required:
• Phillips Screwdriver
• 5/16" Hex Socket Wrench or Nut Driver
If any of these parts are missing or damaged, contact dealer where
you purchased this kit. If they cannot supply original replacement
parts, either contact your nearest Parts Central or call DESA Inter-
national at 1-866-672-6040 for information.
101981-01F
TM INSTALLATION INSTRUCTIONS
For more information, visit www.desatech.com
For more information, visit www.desatech.com
IMPORTANT: Always handle firebrick panels with two hands.
WARNING: Turn off, unplug, and let fireplace cool
before installing brick liner. Only a qualified service
person should service and repair fireplace.
NOTICE: You must remove log base assembly before
installing brick liner.
1. To remove screen, lift screen up off the screws in front of fire-
place (see Figure 1).
Figure 1 - Removing Fireplace Screen
1 1
Screws for
Mounting
Screen