Clock Setting; Tuner Setting - Toshiba SD-V392SU Service Manual

Basic setup

Clock setting

The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches for
a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
AUTO CLOCK setting
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
1
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outlet.
3
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not programmed.
Wait at least three minutes and press
4
POWER.
5 Press CALL to check the clock setting on
the on screen display.
CALL
8 : 47 AM MON CH 125
DISPLAY
STEREO SAP
00 : 00 : 00 SP
6
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
AUTO CLOCK adjustment
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
24
Basic setup
Clock setting (continued)
If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.
Manual clock Setting
EXAMPLE: Setting the clock to "8:30 AM" March,
27 (SAT), 2004.
1 Press VCR MENU.
VCR MENU
SETUP
2
Press SET + or – to select "SYSTEM SETUP",
then press ENTER.
MENU
SET +
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH – CH +
CH SETUP
ENTER SYSTEM SETUP
SET –
+/-/ENTER/MENU
á ñ
3
Press SET + or – to select "CLOCK SET",
then press ENTER.
SYSTEM SETUP
SET +
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
CH – CH +
ON OFF
ENTER
AUTO CLOCK ON OFF
STANDARD TIME
SET –
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á ñ
4 Press SET + or – to set the month, then press
ENTER.
MONTH 3
SET +
DAY 1 (MON)
CH – CH +
YEAR 2004
ENTER
TIME 12 : 00 AM
SET –
〈+/–/ENTER/CANCEL/MENU 〉
5
Set the day, year and time as in step 4.
MONTH 3
DAY 27 (SAT)
YEAR 2004
TIME 8 : 30 AM
á +/–/ENTER/CANCEL/MENU
26
CALL
POWER
VCR DVD
1,5
2,4
2,3
To set AUTO CLOCK to off
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting:
1 Press VCR MENU.
MENU
TIMER REC SET
AUTO REPEAT
VCR MENU
SAP
SETUP
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU +/-/ENTER/MENU
á á
2
Press SET + or – to select "SYSTEM SETUP",
then press ENTER.
MENU
SET +
TIMER REC SET
AUTO REPEAT
SAP
CH – CH +
CH SETUP
ENTER
SYSTEM SETUP
SET –
+/-/ENTER/MENU
á
3
Press SET + or – to select "AUTO CLOCK".
SET +
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
CH – CH +
NO NOISE BACKGROUND
ENTER
AUTO CLOCK
SET –
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á
4
Press ENTER to select "OFF".
SYSTEM SETUP
SET +
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
CH – CH +
ENTER
AUTO CLOCK
STANDARD TIME
SET –
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á
5
Press VCR MENU repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to
VCR MENU
"OFF", the AUTO CLOCK adjust-
SETUP
ment does not function.
• Set the clock manually
26
1
2–4
CANCEL
2–4
6 After setting the clock, date and time starts
functioning automatically.
8 : 30 AM SAT
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
ñ
To set STANDARD TIME
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the AUTO CLOCK setting.
To correct the situation:
1
Press VCR MENU.
VCR MENU
SETUP
ON OFF
ON OFF
2 Press SET + or – to select "SYSTEM SETUP",
then press ENTER.
ñ ñ
SET +
CH – CH +
ENTER
SET –
ON OFF
ON OFF
3 Press SET + or – to select "STANDARD TIME",
then press ENTER.
ñ
SET +
CH – CH +
ENTER
SET –
ON OFF
4
Press SET + or – to select your time zone,
ON OFF
then press ENTER.
ñ
SET +
CH – CH +
ENTER
SET –
ON OFF
ON OFF
ñ
5 Press VCR MENU twice to return to the
normal screen.
VCR MENU
SETUP
. Notes:
• To be able to select the standard time, the clock must first be
set by AUTO CLOCK once.
• If you live in Newfoundland and the AUTO CLOCK does not
function properly, set the AUTO CLOCK menu option to "OFF"
and set the clock manually.

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR's memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
TV/CATV selection
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
1
Press VCR MENU. Press SET + or – to select
"CH SETUP", then press ENTER.
VCR MENU
SETUP
SET +
CH – CH +
ENTER
SET –
2
Press SET + or – to select "TV/CATV".
SET +
CH – CH +
ENTER
SET –
3 Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
SET +
CH – CH +
ENTER
SET –
TV - VHF/UHF channels
CATV - CABLE TV channels
4 Press VCR MENU until the menu screen is
cleared.
VCR MENU
SETUP
Note:
You can't select "CH SETUP" if you set the channel to "L1" or
"L2".
To set DAYLIGHT SAVING TIME
You can set the DAYLIGHT SAVING TIME automatically or
manually.
1
Press VCR MENU.
Press SET + or – to select "SYSTEM SETUP",
MENU
then press ENTER.
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
VCR MENU
CH SETUP
SETUP
SYSTEM SETUP
+/-/ENTER/MENU +/-/ENTER/MENU
á á ñ ñ
SET +
CH –
ENTER
SET –
MENU
2 Press SET + or – to select "DAYLIGHT
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF SAVING TIME", then press ENTER.
CH SETUP
SYSTEM SETUP
SET +
+/-/ENTER/MENU
á ñ
CH –
ENTER
SET –
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND 3 Press SET + or – to select one of the
ON OFF
AUTO CLOCK ON OFF
options, then press ENTER. Press VCR
STANDARD TIME
DAYLIGHT SAVING TIME
MENU until the MENU screen is cleared.
+/-/ENTER/MENU
á ñ
VCR MENU
SETUP
ATLANTIC : GMT–4hours
EASTERN : GMT–5hours
SET +
CENTRAL : GMT–6hours
MOUNTAIN : GMT–7hours
CH –
ENTER
PACIFIC : GMT–8hours
SET –
ALASKA : GMT–9hours
HAWAII : GMT–10hours
AUTO : AUTO SET
(GMT: Greenwich Mean Time)
Notes:
• When shipped from factory, the DAYLIGHT SAVING TIME is
set to "AUTO" position.
• When the clock is not set, DAYLIGHT SAVING TIME setting
is not available.
• When there is no DAYLIGHT SAVING TIME in your area, al-
ways select "OFF" position in step 3.
Setting channels automatically
1
Repeat left step 1 and press SET + or – to
select "AUTO CH MEMORY".
SET +
CH –
ENTER
SET –
2 Press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á ñ
SET +
CH –
ENTER
SET –
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTEM SETUP
CH +
+/-/ENTER/MENU
á ñ
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
CH +
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á ñ
for manual setting
ON:
(forward one hour)
OFF: for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
When you want to set the DAYLIGHT
SAVING TIME manually, on the first
Sunday in April you set to "ON", and
CH +
on the last Sunday in October you set
to "OFF".
DAYLIGHT SAVING TIME
ON
OFF
AUTO
+/-/ENTER/MENU
á ñ
25
VCR DVD
1,4
1,3
1,2
CH SETUP
TV CATV
CH + AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.
CH 002
CH +
27