Clock Setting - Toshiba SD-KV550SU Owner's Manual

Basic setup (VCR)

Clock setting

The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches
for a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
AUTO CLOCK setting
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
1
2
3
4
5
6
AUTO CLOCK adjustment
The AUTO CLOCK adjustment will be updated at
6:00 AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
24
2I30201B-En_p18-25
Downloaded From Disc-Player.com Toshiba Manuals
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
Plug the AC power cord to the AC outlet.
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not programmed.
Wait at least three minutes and press POWER.
Press CALL to check the clock setting on
the on screen display.
8 : 47
STEREO SAP
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
24
To set AUTO CLOCK to off
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting, it can be turned off:
1
Press VCR MENU.
2
Press SET + or – to select "SYSTEM SETUP",
then press ENTER.
3
Press SET + or – to select "AUTO CLOCK".
MON CH 125
AM
00 : 00 : 00 SP
4
Press ENTER to select "OFF".
5
Press VCR MENU repeatedly to return to the
normal screen.
POWER
VCR DVD
VCR MENU
ENTER
SET +/–
CALL
ENU
TI ER REC SET
ON
AUTO REPEAT
SAP ON
CH SETUP
SYSTE SETUP
+/Ð/ENTER/ ENU
ENU
TI ER REC SET
ON
AUTO REPEAT
ON
SAP
CH SETUP
SYSTE SETUP
+/Ð/ENTER/ ENU
Y TEM ETUP
CLOCK ET
LANGUAGE/IDIOMA/LANGUE
NO NOI E BACKGROUND
ON
AUTO CLOCK ON
TANDARD TIME
DAYLIGHT AVING TIME
+/Ð/ENTER/MENU
Y TEM ETUP
CLOCK ET
LANGUAGE/IDIOMA/LANGUE
NO NOI E BACKGROUND
ON
AUTO CLOCK ON
TANDARD TIME
DAYLIGHT AVING TIME
+/Ð/ENTER/MENU
• When the AUTO CLOCK is set to
"OFF", the AUTO CLOCK adjust-
ment does not function. You must set
the clock manually .
26
1/13/06, 2:47 PM
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF