Selecting The Call Tone; Busy Channel Lockout - Uniden UH7760NB Owner's Manual

Operation

Selecting the Call tone

1. Press [MENU/ENTER] three times.
The call tone setting flashes.
2. Press /
setting between 1, 2, 3, 4 and 5.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

Busy Channel Lockout

If the channel is already in use, you can prevent the UHF CB Radio
from transmitting . This is particularly important when using CTCSS/DCS.
1. Press [MENU/ENTER] four times.
The BCL setting flashes.
2. Press /
setting between ON or OFF.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
UNIDEN UH7760NB
to change the
to change the
21
Remote SPK/MIC UHF Mobile Radio