Operating The Uhf Cb Radio In Duplex Mode - Uniden UH7760NB Owner's Manual

Operation
Operation with the aid of a Repeater Repeater Station (Duplex).
The signal coming from your radio is received by the Repeater Station
and the re-transmitted at the same time on another channel. This
operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH02 but Transmit on CH32
etc...
If you transmit on CH01 Duplex mode, you are actually transmitting
on CH31 the repeater station down-coverts your signal and
retransmits on CH01.

Operating the UHF CB Radio in Duplex Mode

For this example we are adopting CH01 as the
channel being used in your area for repeater use.
1. Press [MENU/ENTER]. The duplex
setting flashes.
2. Press /
between ON (" r " for repeater channels
01 - 08 or " n " for repeater channels 41 - 48)
or OFF (standard channel numbering).
3. Press [MENU/ENTER] to store the setting.
21
UNIDEN UH7760NB
Operation with the aid of a Repeater
Station (Duplex).
to change the setting
17
Remote SPK/MIC UHF Mobile Radio