Advertisement
Please check to make sure the following items are included with the main unit in
the carton:
(1) Operating instructions
(2) Platter
(3) Slip mat
(4) Counterweignt
(5) 45 rpm adaptor
(6) Headshell with 520sk cartridge
(7) Dust cover
(8) AC cord
(9) Connecting cord
FEATURES
1.High torque brush less DC motor
This set uses a high torque brushless DC motor to reach the normal speed of
rotation rapidly and reduce braking time.
2. +/-8%/+/-12% pitch control
The pitch can be changed in a range of +/-8%,+/-12% using the pitch slider.
A quartz lock On/off button lets you return to the normal speed of rotation at the
touch of a button.
3. Pitch correction
When pitch correction is on, musical key tone can be kept constant even when
the platter speed is changed with the slider.
4. 78 rpm compatible
This set can play 33, 45 and 78 rpm records.
5. Digital out
The music output is in digital format and can be reproduced on an external digital
processor or an MD recorder.
Remover all the parts from the box.
1
2
Remover the packaging materials from the unit and all the parts.
Set the parts on a stable surface when removing the packaging materials.
Handling the parts roughly could result in scratches or deformation.
Check the voltage selector switch is set to an appropriate position.
3
ex.
U.S.A & CANADA :
115V
EUROPE :
230V
Insert the platter onto the motor shaft.
4
Set the slip mat on the platter, lining it up with the motor shaft.
5
2
Be sure to turn off the amplifier's power when making connections.
(1) Analog connections
1
Connect the left (white) and right (red) plugs RCA cord to the amplifier's
left and right "Phono".
2
Connect the connector side of the power cord to the set's power
connector terminal (AC IN).
3
Plug the power cord into an appropriate power outlet.
Check that the power outlet's capacity is sufficient.
(2) Digital connections
1
Use an RCA cord (not included) to connect the digital output jack.
2
Connect the RCA cord of step 1 into the digital input jack of a "Digital
Processor" or "MD Recorder".
3
Connect the connector side of the power cord to the set's power
connector terminal (AC IN).
4
Plug the power cord into an appropriate power outlet.
Check that the power outlet's capacity is sufficient.
Power supply:
AC 115/230v, 50/60Hz:
Power consumption:
15W
Dimensions:
450(W) x 352(D) x 148(H)mm
Weight:
9.5Kg
Motor:
8pole, 3phase, brushless DC motor
Starting Torque:
More than 1.6 kgf.cm
Platter:
330mm dia. Aluminun diecast
Pitch:
+/-12%, +/-8%
Brake:
Electronic brake
Wow & Flutter:
Less than 0.20% WRMS (JIS WTD) with 33
S/N ratio:
More than 50dB (DIN-B)
Channel Separation:
More than 15 dB
7
rpm
1/3
Advertisement
