White Outdoor ZT 42 Operator's Manual page 30

REPLACING THE DECK DRIVE BELT
• Remove the deck from beneath the tractor, (refer
to Deck Removal on page 26).
• Remove the hex tapping screws securing the belt
covers to the deck and remove the belt from the
spindle pulleys. Refer to Figure 33.
Belt Cover
Belt Cover
42 INCH MOWER DECK
Idler Pulley
50 INCH MOWER DECK
Idler Pulley
Figure 33
• Depending on which deck (42" or 50") you are
working on, install the new belt around the
spindle pulleys as shown in the applicable
graphic of Figure 33. Reinstall the belt covers.
• Route the belt rearward between the two idler
pulleys and reinstall the deck following the
instructions in Deck Installation on page 26.
Idler Pulley
'V' Belt
Idler Pulley
30
Belt Cover
'V' Belt
Belt Cover