Activation And Service; Create Your Account And Pick Your Plan - Zte Warp sync User Manual

Plug the AC adapter into an electrical outlet.
l
Note: Your phone's battery should have enough charge for the phone to turn on and find a signal, run the
setup application, set up voicemail, and make a call. You should fully charge the battery as soon as possible.
Note: If your phone is brand new or has not been used for some time, you may not see any indication that the
phone is being charged at first. This is caused by an over-drained battery and your phone will return to normal
after enough time of charging.
3. Press and hold the Power Button to turn the phone on.
If your phone is activated, it will turn on, search for service, and begin the setup process.
l
If your phone is not yet activated, see Activate Your Phone for more information.
l
Note: Do not press the Volume Button when turning the phone on. Otherwise, you may switch your phone
to Download Mode, Recovery Mode, or Factory Testing Mode. To switch back to normal, press and hold the
Power Button for about 15 seconds.

Activation and Service

Before using your phone, you must set up your service with Boost Mobile. You will need your
phone's serial number (MEID), printed on the box label and on a sticker inside the battery
compartment.

Create Your Account and Pick Your Plan

Set up your Boost Mobile account.
1. From your computer, visit boostmobile.com/activate.
2. Enter your phone's MEID and click start activation process.
Get Started 4