Table of Contents
Advertisement
• Connect earth/work cables as close as possible to the welding zone to prevent
welding current from traveling long paths and possibly causing electric
shocks or fire hazards.
NOISE can damage hearing
Noise from some welding/cutting processes can exceed recognized safe levels
causing both temporary and permanent hearing loss.
• Wear ear protection if noise level exceeds recommended limits.
MAGNETIC FIELDS can affect pacemakers
• The strong magnetic fields caused by the arc welding process and equipment
can affect pacemakers.
• Wearers of pacemakers should keep away from the welding area and consult
their doctor before going near any arc welding, gouging or cutting processes.
LIMITED WARRANTY
The machine is insured against damage upon shipping. If you machine is damaged
in any way when you receive it, you must retain all shipping materials and packing.
Call our customer service department and report the damage immediately.
There is a 1 year warranty on all internal electronic parts. The torch, cables, power
cord, clamps, air regulator, hoses, case & paint and consumables are not covered
under warranty. You must use dry air via the air regulator and empty the reservoir
from the water separator frequently to insure proper protection from moisture.
This machine is designed to operate from 200~240VAC/380VAC at 50-60Hz Only.
Operating outside of limits will void warranty.
Warranty coverage covers repair or replacement of damaged machine or
damaged circuit board. Warranty does not cover shipping from the customer but
does cover return shipping within the Cont. United States. If you are going to
return a machine to us for repairs, it must be well packed and insured.
Customers who own machines that require warranty coverage should contact
our warranty department by email at
authorization code.
Customers who own an out-of-warranty machine that require repairs should
contact us for an estimate.
info@hkweld.com
to obtain a return
5
Advertisement
Table of Contents
