Canon PowerShot S2IS User Manual page 272

80
I
Enjoy Customizing Your Camera with the My Camera Settings
Adding New Data to the
My
Camera Window
Create a new image or sound file and add it to the My Camera window.
Create an Original Start-up Image File and then Add It
Start by using an image editing program to create the image file that will become the start-up
image and save it to the computer. Create a JPEG image at a size of (w) 320 x (h) 240 pixels.
, Open the My Camera window, select [Start-up Image] from the Type list box.
2
Click the [Add] button.
3
Select the file you created and click
[Open].
This concludes the process for adding new
data.
You can save the newly created data to the
camera using the procedures described in
the Saving the My Camera Settings to the
Camera section (p. 79).
Add an Original Sound File
Change the file to a WAV sound file after you have copied the sound file to the computer.
Then proceed with the steps as described in Create an Original Start-up Image File and then
Add It.
• Record the sound as an 11.025 kHz or 8.000 kHz, 8 bit, mono WAV
sound file.
• The following chart shows standard time lengths for My Camera Sounds.
Duration in Seconds
Type
11.025 kHz
8.000 kHz
Start-Up Sound
1.0 sec. or less 1.3 sec. or less
Shutter Sound
0.3 sec. or less 0.4 sec. or less
Operation Sound
0.3 sec. or less 0.4 sec. or less
Self-Timer Sound
2.0 sec. or less 2.0 sec. or less