Canon PowerShot S2IS User Manual page 117

In Playback mode (including single image playback, index playback,
magnified playback and the review immediately after shooting in
Shooting mode) you can attach sound memos (up to 60 seconds) to
an image. The sound data is saved in the WAVE format.
1
Press the
t
button while playing back images.
The sound memo control panel will display.
Use the ..... or
~
button to select
[I]
(Record) and press the SET button.
• The recording starts and the elapsed time is
displayed. Speak towards the microphone of
the camera.
• Changing the Sound Mode (p. 68)
• To stop playback, press the SeT button. To
restart recording, press the SET button again.
• You can add as many sound memos as you like until their total time
reaches 60 seconds.
Playing back the Sound Memos
• Select
~.
Images with sound memos are displayed with the
D
mark
(they do not display in No Information display mode).
To stop playback, press the SeT button. To restart playback, press the
SET button again. You can adjust the volume with the .A. or .. button.
Erasing the Sound Memos
• Verify that
D
is displayed, select
[?l]
with the'" or'" button, and press
the SeT button.
Use the'" or ... button to select [Erase] and press the SeT button.
exiting the Sound Memos Menu
• Press the
t
button.