Table of Contents
Advertisement
Video loss detected on the channel
USB device detected
DVD burner is detected
Connected to the LAN cable.
Timer recording is on
Red：Timer is set and recording has been started
White：Timer is set but recording has not yet been started
AUTO-seq is on
2X
2X zoom in is on
Freeze is on, screen is frozen
LOCK is on
PTZ control is on
IR remote signal has been set to 1-8 to correspond to your 1-to-8
remote control. Meanwhile, the standard remote control can‟t
control DVR under this situation. It can only be controlled
1~8
by1-to-4 or 1-to-8 remote controls (optional device).
Icon
/
/
3-2 PLAYBACK Mode
Switch to PLAYBACK mode by pressing "PLAY" under the LIVE mode, the graphical icon
will show up on the upper center of the screen and the operation panel ( see below picture)
will show up at right lower corner of the screen. You can drag the panel by mouse to place it
on any location of your screen.
Description
Image quality (High/Low)
Full screen
Record
Snap shot
Record and snap shot file saving path setup
15
Advertisement
Table of Contents
