10
BC10 basic controller
Press the "Chimney Sweep"
to set the pump post-purge period. The pump post-
purge period can be set from 5 – 60 minutes (
) or to 24 hours (
Press the "Service"
NOTICE
On thermostat only systems a 5 to 10 minute
post-purge setting is recommended to purge
heat from the appliance.
We reserve the right to make any changes due to technical modifications!
42
or "Reset"
buttons
).
button to confirm the setting.
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
/
-
Buderus Hydronic Systems • http://www.buderus.net