Remote Dial-In - LifeShield Home Security Quick Setup Manual

_LifeShield-QSG-NONDSL.qxp:Layout 1 2/11/10 9:52 PM Page 14
REMOTE ARMING/DISARMING OF YOUR SYSTEM
There are many ways to remotely arm or disarm your system.
• Keychain Remote - from the exterior of your home
• Remote Dial-In - from any touch-tone phone, anywhere in the world
• LifeShield.com - from a computer with broadband Internet access
KEYCHAIN REMOTE
Disarm your system before you enter your home or arm your system as you close the door behind you using
your Keychain Remote. It works from within 15 feet from your door, and does not require a User Code.
ARM
1. Press STAY or AWAY on Keychain Remote
2. The system will respond with a light blink and beep, letting you know
the system is armed
DISARM
1. Press OFF to disarm the system before entering
2. The system will respond with a light blink and beep, letting you know
the system is disarmed

REMOTE DIAL-IN

From anywhere, on any touch-tone phone, remotely arm or
disarm your system.
ARM/DISARM
1. Dial your home phone number
2. When answered by system, press star *
3. Enter User Code
4. Press 9 for security system access
a. To Arm Stay, select 1
b. To Arm Away, select 2
c. To Disarm, select 4
LIFESHIELD.COM
From a PC that has broadband Internet access you can go to LifeShield.com , anywhere and anytime,
and arm or disarm your system.
ARM
1. Login to LifeShield.com
2. Enter User Name and Password
3. Click Arm Stay or Arm Away or Arm Inst Stay
4. Click Enter
DISARM
1. Click Enter
Beware!! When arming remotely, either through www. LifeShield.com or dial-in,
the system will arm immediately with no exit delay.
For help, call Customer Support at
1.877.XXX XXXX