Through system "Volume Control" to adjust recording volume, specific steps as
follows:
1. In system notification icon area on right corner double-click "
pop-up " Open Volume Control" window.
2. In the pop-up display recording equipment list, select "Digital Audio Interface
(XI100DUSB-SDI Audio)", click the "Properties" button, the system will pop
up the corresponding device's properties dialog box
3. In Properties dialog box, select "Levels" property page, then you can operate
volume control and "Quiet" according to your requirement.
Figure 5
9 Compatible Software Instruction
XI100DUSB-SDI is currently compatible with the following capture software (tested):
Copyright © 2008-2011 Nanjing Magewell Electronics Co., Ltd. reserves all the rights
,
Windows 7 Recording Device Properties dialog box
" button to
7/16