System Requirements; Hardware And Driver Installation - Magewell XI100DUSB-SDI User Manual

 Available USB3.0 interface

4 System Requirements

System should be one of the following systems (x 86 version or x64 version):
 Microsoft Windows Server 2003
 Microsoft Windows Server 2008 R2
 Microsoft Windows 7
 Microsoft Windows 8
 Linux (Kernel version 2.6.38 and above)
 OS X (10.8 and above)

5 Hardware and Driver Installation

 XI100DUSB-SDI USB3.0 dongle supports hot-plugging/swap. Insert the USB3.0
cable head to USB3.0 interface, the other side of the cable into your computer's
USB3.0 interface.
 It's PnP devices, without having to install drivers, if POWER and ACTION lights
lit, which means it working properly
Recommendation: In actual use, first plug SDI cable, then plug the USB3.0 interface.
Because an SDI signal sources are often not reliable grounding, Ground and the
computer will be relatively large voltage difference, it may cause the signal source or
capture not working properly.
2/16
Copyright © 2008-2011 Nanjing Magewell Electronics Co., Ltd. reserves all the rights
http://www.magewell.com