" in "Devices" menu, then click "Video Capture Filter ..." in "Settings" menu,
Video
pop-up " Filter Properties dialog window".
In the " Proc Amp" panel, you can set the brightness, contrast, hue, saturation, and
other relevant parameters
Display " Filter output pin " In Common Software
7.2
AMCAP: Double click "AmCap.exe", choose HD video device "
" in "Devices" menu, then click "Video Capture Pin ..." in "Option" menu,
Video
pop-up " Filter output pin" window.
Copyright © 2008-2011 Nanjing Magewell Electronics Co., Ltd. reserves all the rights
Figure 3, Video property page
XI100DUSB-SDI
5/16