Downloaded Files Management; Firmware Reset - Bauhn HDC-08 Instruction Manual

Settings (Cont.)

Downloaded files management

When downloading files, you can check download status, view, reopen or
delete them using "Download management".
• Applications > Downloads
• Click any one to open it.
• Choose any file you want to share with others, then click "Sharing"
• Choose any file you want to delete by clicking
• Click "by size" or "by date" to arrange the files.

Firmware reset

This procedure will completely reset the tablet and remove all user created,
downloaded and installed files and data, along with any lock screen
password.
NOTE: This procedure cannot be reversed.
1. Turn off the tablet. Disconnect all cables. Eject any SD cards.
2. Gently press down at the same time (and continue to hold) both the
Power button and the Volume up ( + ) button.
3. After several seconds the unit will display a small menu in white text.
When you see this text, release both buttons.
4. Press the Vol + button repeatedly to highlight "[Recovery Mode]".
5. Press the Vol - button once to confirm.
6. The Bauhn logo will display then the Android Robot with an Exclamation
Mark will appear. Press the Power button once.
7. Press the Vol - button 4 times to select "wipe data/factory reset".
8. Press the Vol + button once.
9. Press the Vol - button 7 times to select "Yes - delete all user data".
10. Press the Vol + button once, and the reset procedure will start. This
will normally only take a few moments and the message "Data wipe
complete" will be displayed once finished.
11. Press the Vol - button 5 times to select "wipe cache partition".
12. Press the Vol + button once. This will wipe all user created files.
13. Confirm that the option "reboot system now" is highlighted, then press
the Vol + button once.
14. The reset is now finished. The tablet will reboot and will be ready to set
up and configure to your needs.
After Sales Support
Telephone:
1300 886 649
Email: info@tempoaustralia.com.au
.
.
.
41