Checking Current Program Info; Changing The Broadcast Signal; Checking Digital Channel Signal Info And Strength - Samsung SMART TV E-Manual

Checking current program info

To get information about a show that you are watching, press the Enter button on the standard remote
control. To view information about, start instant recording for, or apply the
current program, select it in the Program Info window.
You can view information about, start
are watching by pressing the Enter button on the Program Info window. In addition, you can view
information about upcoming programs by using the left or right directional buttons, or you can set up
Schedule Viewing
a
Info window displayed for that program.
"
Press the Enter or
"
To view program info, you must first set the TV's clock
"
For more information on
"
Program information may differ with the type of incoming signal and may not be available at all for certain
programs.
"
For more information on

Changing the broadcast signal

메뉴/123 메뉴 Broadcasting
You can choose the appropriate DTV mode for your viewing environment. Select Air or Cable. Air is
suitable for homes equipped with a separate, over-the-air antenna. Cable is suitable for homes that
have subscribed to a local cable-service or satellite-service provider.
"
You do not need to use this function if your TV is connected to a cable or satellite box.

Checking digital channel signal info and strength

메뉴/123 메뉴 Support
You can check the digital channel's signal information and strength.
"
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to
adjust the antenna for increased signal strength and improved HD channel reception.
"
This function is only available for digital channels.
Record
Schedule Recording
or
정보표시
button, on the standard remote control.
Schedule Recording, refer to 'Recording Programs.'
Schedule Viewing, refer to 'Setting Up a Schedule Viewing.'
Antenna
Self Diagnosis
Timeshift
of, or apply the
for a program by pressing the Enter button on the Program
(메뉴/123
Try Now
Signal Information
Timeshift
function on a
function to a show that you
메뉴 System Time
Try Now
Clock).