Table of Contents
Advertisement
screen will change, this time the title bar will read
"Confirm MMSI Entry". You must now repeat the above
entry procedure to confirm your MMSI entry.
Once you are sure that your confirmation is correct,
highlight "OK" and select it to save it.
If both entries are identical the following message will be
displayed confirming a successful entry.
Figure 5.7 - MMSI Confirmation
Clearing this message will take you to the "Vessel
Configuration Information" window, where you can continue
entering the remaining ships configuration information.
If the two entered MMSI numbers do not match, a
message indicating this will be shown.
Figure 5.8 - MMSI mismatch warning
Clearing the display will revert you back to the
Configuration Request window as shown in Figure 5.3 to
start again.
If you need to cancel the input mode, highlight the
"CANCEL" button and select it. A warning will be shown in
the display.
Figure 5.9 - MMSI cancelled warning
Clearing the display will revert you back to the
Configuration Request window as shown in Figure 5.3.
Initial Configuration 31
Advertisement
Table of Contents
