Download  Print this page

Ceramic Glass; Home Canning; Cookware - KitchenAid KGCC505 Use And Care Manual

Gas cooktop
Hide thumbs

Advertisement

On model KGCV566, the grates are located near the outside
frame.
Locator Pin
On all models except for model KGCV566, the locator pin on the
grate must be positioned in the burner cap hole to hold the grate
in place.
1
2
1. Locator Pin
2. Burner Cap

Ceramic Glass

Wiping off the cooktop before and after each use will help keep it
free from stains. For more information, see "General Cleaning"
section.
Do not store jars or cans above the cooktop. Dropping a
heavy or hard object onto the cooktop could crack it.
Do not allow objects that could melt, such as plastic or
aluminum foil, to touch any part of the entire cooktop.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.

Home Canning

When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than 1 in.
(2.5 cm) outside the cooking area.
Do not place canner on two surface cooking areas, elements
or surface burners at the same time.
For more information, contact your local U.S. Government
Agricultural Department Extension Office. In Canada, contact
Agriculture Canada. Companies that manufacture home
canning products can also offer assistance.

Cookware

IMPORTANT: Never leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides, a well-
fitting lid and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the cooktop or
grates.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE
CHARACTERISTICS
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or
Follow manufacturer's instructions.
Ceramic glass
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Copper
Heats very quickly and evenly.
Earthenware
Follow manufacturer's instructions.
Use on low heat settings.
Porcelain enamel-
See stainless steel or cast iron.
on-steel or cast
iron
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper on
stainless steel provides even heating.
11

Advertisement

loading

  Also See for KitchenAid KGCC505

  Related Manuals for KitchenAid KGCC505

This manual is also suitable for:

Kgcc566Kgcr055Kgcs105Kgcs127Kgcs166Kgct055 ... Show all