Synology RackStation RS814+ Quick Installation Manual page 10

4 Return the board into the RackStation:
a Identify the rail within the RackStation.
b Place the circuit board within the rail and push the board all the way in.
c Tighten the two knobs you unscrewed in step 2.
Confirm New Memory is Recognized
After installing a new memory module in the RackStation, we recommended checking whether or not the system
recognizes the new memory.
To check the memory of the RackStation:
1 Start up your RackStation. (See "Start up the RackStation" for more information.)
2 Install DiskStation Manager (DSM). (See "Chapter 3: Install DSM on RackStation" for more information.)
3 Log in to DSM with an account belonging to the administrators group.
4 Check Total Physical Memory
If the RackStation does not recognize the memory or does not start up correctly, please make sure the memory
was correctly installed.
10 Chapter 2: Hardware Setup
at Main Menu > System Information.
RackStation
RS814+
4096 MB