Settings For Display Video On Hdmi - Toshiba Satellite L650 Series User Manual

■
When you unplug the HDMI cable and re-plug it in please wait at least 5
seconds before you replug the HDMI cable again.
■
When you change the display output or Unplug/re-plug the HDMI cable.
The sound output device and the display output device maybe changed
automatically by the system.

Settings for display video on HDMI

To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
■
■
■
■
Select HD Format
To select the display mode, follow the steps as detailed below:
1. Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select the one of the below selection at "List All Modes".
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
Downloaded from LpManual.com Manuals
User's Manual
When you connect a television or external monitor to the HDMI port
and the display output device is set to HDMI.
When you connect a television or external monitor to the HDMI port
and you connect the television, external monitor or external sound
device to another port.
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Display mode at "List All Modes"
1920 by 1080, True Color (32bit), 60Herts
1920 by 1080, True Color (32bit), 30Herts
(Interlaced)
1280 by 720, True Color (32bit), 60Herts
720 by 576, True Color (32bit), 50Herts
720 by 480, True Color (32bit), 60Herts
Hardware, Utilities and Options
HD Format
1080p
1080i
720p
576p
480p
3-25