Installing A Memory Module - Toshiba Satellite L650 Series User Manual

■
■
■
■

Installing a memory module

To install a memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
2. Remove the AC adaptor and all cables and peripherals connected to
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
5. Loosen the screw securing the memory module cover in place - please
Use a point size 0 Phillips screwdriver.
Downloaded from LpManual.com Manuals
User's Manual
Use only memory modules approved by TOSHIBA.
Do not try to install or remove a memory module under the following
conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode.
c. Wake-up on LAN is enabled.
d. The wireless communication function is on.
Be careful not to let screws or other foreign matter fall into the
computer. It could cause malfunction or electric shock.
Additional memory module is a precision electronic component that
may be fatally damaged by static electricity. Since the human body can
carry static electricity, it is important that you discharge yourself before
touching or installing any additional memory modules. To discharge
your body's static electricity, simply touch any metal close to you with
bare hands.
the Turning off the power
required).
the computer.
Replacing the battery pack
Modes, if required).
note that this screw is attached to the cover in order to prevent it from
being lost.
Hardware, Utilities and Options
section in Chapter 1,
section in Chapter 6,
Getting Started if
Power and Power-Up
3-18