Creating Optical Recovery Discs - Toshiba Satellite L650 Series User Manual

Creating Optical Recovery Discs

This section describes how to create Recovery Discs.
■
■
■
■
■
■
■
■
■
■
A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to DVD media by using the following steps:
1. Have a blank DVD media ready.
2. The application will allow you to choose from a variety of different media
Please note that some of the above media may not be compatible with the
optical disc drive installed into your computer. You should therefore verify
the optical disc drive supports the blank media you have chosen before
proceeding.
3. Turn on your computer and allow it to load the Windows 7 operating
4. Insert the first blank media into the optical disc drive tray.
5. Select the TOSHIBA Recovery Media Creator icon from the
6. After TOSHIBA Recovery Media Creator starts, select the type of media
Downloaded from LpManual.com Manuals
User's Manual
Be sure to connect the AC adaptor when you create Recovery Discs.
Be sure to close all other software programs except the TOSHIBA
Recovery Media Creator.
Do not run software such as screen savers which can put a heavy load
on the CPU.
Operate the computer at full power.
Do not use power-saving features.
Do not write to the disc when the anti-virus software is running. Wait
for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.
Do not use utilities, including those intended to enhance hard disk
drive access speed. They may cause unstable operation and damage
data.
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the disc.
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
Do not use on unstable tables or other any other unstable surfaces.
onto which the recovery image can be copied including DVD-R, DVD-R
DL, DVD-RW, DVD+R, DVD+R DL and DVD+RW.
system from the hard disk drive as normal.
Windows 7 Start menu.
and the title you wish to copy, and then click the Create button.
Getting Started
1-13