Setup Menu; List Of Setup Menu - Panasonic WV-CP620/G Installation Manual

Setup menu

Performing each setting item in the setup menu should be completed in advance to use this unit. Perform
the settings for each item in accordance with the installation conditions and customer requirements.

List of setup menu

Setup item
CAMERA ID
CAMERA
SCENE 1/
SCENE 2
ALC/ELC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
D&N (IR/ELE)
VMD
SYSTEM
SYNC
ALARM IN/OUT
PRIVACY ZONE
STABILIZER
EL-ZOOM
UPSIDE-DOWN
LDC
SPECIAL
CHROMA GAIN
AP GAIN
PEDESTAL
DISPLAY
PIX OFF
COMMUNICATION
CAMERA RESET
SER.NO .
LANGUAGE
Description
This item specifies the camera title. The camera title that indicates the
camera location and other information about the camera is created with
alphanumeric characters and symbol, and then displayed on the screen.
Performs the camera operation settings.
Selects a scene file. It is possible to register and save the settings as a
scene file in case that it is necessary to change the settings such when
shooting at night.
Selects the method of controlling the quantity of light in accordance with the
lens to be used.
Specifies the electronic shutter speed.
Specifies gain adjustment.
Specifies electronic sensitivity enhancement.
Specifies white balance adjustment.
Selects the level of the digital noise reduction function.
Performs each setting regarding the black-and-white mode such as
switching between color and black-and-white images.
Performs settings regarding VMD (Video Motion Detection).
Performs the settings regarding the camera system such as synchronization
and privacy zone.
Only INT method can be used.
Performs the settings of the alarm input/output terminal.
Hides undesired portions in the camera shooting area.
Decides whether or not to enable the image stabilizer.
Switches the electronic zoom on and off.
Flips the camera images vertically or horizontally.
Adjusts the Lens distortion correction to convert the image so that it
matches the square monitor.
Adjusts the chroma level (color density).
Adjusts the aperture level.
Adjusts the pedestal (brightness) level.
Performs the image display setting.
Corrects image defects such as flaws.
Performs the communication setting of the system with a receiver into
which this unit is integrated.
Restores the settings in the setup menu to the default settings.
Displays the serial number of this unit.
Selects a language to be used in the setup menu.
23