Panasonic WV-CP620/G Installation Manual page 22

4 When the focus ring is positioned near the best focus position, the position will
automatically be memorized as the "PEAK HOLD" position (the higher the value is, the
closer it is to the focus point).
5 When the focus ring is moved, the current focus position will be indicated on
"INDICATOR". Adjust the focus position so that the indicator value goes close to the
"PEAK HOLD" position.
6 When the indicator value goes to the best focus position, "BEST FOCUS" will be displayed
in reverse at the lower right corner of the screen.
7 Press the [SET] button again to close the "FOCUS ADJUSTMENT" menu. (No operation for
3 minutes also closes the menu.)
Important:
• If the view angle changes during adjustment, press the [SET] button to close the "FOCUS
ADJUSTMENT" screen (once the view angle changes, the "PEAK HOLD" and "INDICATOR"
values will also change), and repeat from step 3 after the view angle is fixed.
• When shooting in the following place or following subjects, press the [SET] button again to
close the "FOCUS ADJUSTMENT" screen. Adjust to the best focus position while viewing the
image.
• Frequently moving subject
• Subject with large illuminance change
• Subject with low illuminance
• Too bright or reflective subject
• Subject through a window
• Place where the lens easily becomes dirty
• Subject with less contrast such as white wall
• Subject with remarkable depth
• Subject with heavy flicker
• Subject with horizontally parallel lines such as a shutter
22