Cisco UCS C240 M4 Installation And Service Manual page 67

Chapter 3 Maintaining the Server
Figure 3-16
d. Align the four heatsink captive screws with the motherboard standoffs, and then use a Number 2
Phillips-head screwdriver to tighten the captive screws evenly.
Note
Step 10 Replace the air baffle.
Step 11 Replace the top cover.
Step 12 Replace the server in the rack, replace cables, and then power on the server by pressing the Power button.
OL-32474-01
Thermal Grease Application Pattern
Alternate tightening each screw evenly to avoid damaging the heatsink or CPU.
Installing or Replacing Server Components
Cisco UCS C240 M4 Server Installation and Service Guide
3-27