System Setting; Screen Saver; Load Default - Toshiba Symbio BDX6400KU User Manual

Down_samp
Select the digital audio signal sampling frequency. (Only available on Coaxial)
48k: For discs recorded at sampling rate of 48 kHz.
96k: For discs recorded at sampling rate of 96 kHz.
192k: For discs recorded at sampling rate of 192 kHz.
Dolby DRC
Select the Dynamic Range Control (DRC) mode which makes it available to listen to a movie at a low volume
without losing sound clarity.
Off: Non-dynamic range compress.
On: Dynamic range compress.
Auto: Adjust the DRC according to input audio.
The setting of Auto is effective for Dolby
Stereo Down Mix
Select whether to downmix the multi-channel audio into fewer channels.
Stereo: Downmixes the multi-channel audio into two channel stereo. Choose when the unit is
connected to equipment that does not support virtual surround function such as Dolby
Surround Encoded (LtRt): Downmixes the multichannel audio into surround compatible stereo.
Choose when the unit is connected to equipment that supports virtual surround function such as Dolby
Pro Logic.

System Setting

1
In the Setting menu, use the / button to select System and press OK.
2
Use the / button to select an option and press OK.
3
Press the button or the RETURN button to return to the previous menu.

Screen Saver

The screen saver helps protect the TV screen. You can turn on/off the screen saver mode.
On: Sets the screen saver active after approximately 5 minutes without operation.
- The unit will switch to standby mode if there is no operation after the screen saver is engaged for
approximately 20 minutes.
Off: Turns off the screen saver mode. The unit will not switch to standby mode automatically.
Disc Auto Play
Turns On or Off the disc automatic playback switching mode.
On: The disc playback automatically after loading.
Off: Turn off disc auto play mode.
CEC
This feature uses CEC (Consumer Electronics Control) technology and allows you to control Toshiba HDMI™
CEC compatible devices from the player's remote control via the HDMI™ connection.
On: Turns on HDMI
With CEC on, pressing SETTING, PLAY/PAUSE button will power on the TV when the TV is in the
standby mode. When you turn the TV off, this player will automatically turn off.
Off: Disables HDMI

Load Default

Resets all settings of the player to initial default state.
- Follow the instructions on the TV screen to confirm the default setting operation.
TrueHD.
®
CEC features.
TM
CEC features.
TM
Customizing
®
27
Pro Logic.
®