Summary of Contents for Ivation PORTABLE SMART WASHER
Page 1
User Guide Introduction Thank you for purchasing our Portable Smart Washer, and welcome to the Ivation™ family. This user manual is meant to offer you a brief walkthrough of the device’s features and usage protocols. We hope you find this manual helpful. For additional information and technical support, please feel encouraged to contact our help team at info@myivation.com.
Intended Usage This smart pressure washer is a complete and independent cleaning solution in one small, portable unit that can be powered by a wall plug, car plug, or its built-in rechargeable battery. It enables you to perform onsite vehicle cleaning, household cleaning and so much more without the need for an additional hose, a water line, or even a power outlet.
Operation Parts Assembly: 1. Turn Tank Cover (2) 2. Fill tank with clean 3. Replace Tank Cover counterclockwise to remove. water 50°F to 104°F (2) by turning clockwise. 4. Connect Hose (18) to 5. Connect Spray Gun Hose Inlet (4). (15) to Hose (18).
Page 5
Power & Charging: The Ivation™ Portable Smart Washer can be powered in one of two ways: a. By connecting the Power Cord (9) to your vehicle’s power port and toggling the Power Switch (5) to the “II” position. b. By toggling the Power Switch (5) to the “I” position and thus drawing power from the internal rechargeable battery.
Page 6
7. Spill any remaining water from Water Tank (1). 8. Place all loose parts in Mesh Storage Compartment (7). 9. Store your Portable Smart Washer indoors above 32°F. Storing in Freezing Conditions: If unit must be stored in temperatures below 32°F, you can prevent freezing and reduce mineral deposits by using a pump winterizer/protector or a non-toxic RV anti-freeze.
7. If water pressure is still too high, repeat steps 1 and 2. Replacing Fuse: In the event that your Portable Smart Washer has surged, replace the fuse by following these steps: 1. Unscrew end of Power Cord (9) adaptor.