OF 30 AND 50 L STEEL TANK VITRIFIED COTING (GTV, GTH AND GTE) We are grateful for the confidence you have shown by choosing a Gabarrón electric water heater, conceived and manufactured with the permanent objective of perfection. This apparatus will fully satisfy your needs for years.
HORIZONTAL RANGE – GTH Capacity Power Maintenance Litres Consumption at weight 65° (kWh/24h) (kg) 1600 1,16 2200 1,54 1182 **DISTANCE BETWEEN SUPPORTS SMALL CAPACITY RANGE – GTE Capacity Power Maintenance Litres Consumption Weight at 65° (kW/24h) (kg) 2000 0,73 2000 INSTALLATION The water heater must be installed as close as possible to the point of use and protected from possible freezes.
LOW PRESSURE ASSEMBLY. If supply pressure exceeds 5.5 bars, it is compulsory to install a pressure reducer in the entry point of the house. Recommended pressure is from 3 to 4 bars. The installation is made with a 7 bar membrane safety valve connected to the water entry of the water heater equipped with an anti-return device.
Page 5
The earth of the apparatus is compulsory (there is a connection with the following symbol ). You must ensure it is connected to a fixed socket with an earth device. Thermostat: It is a high quality component built, calibrated and monitored carefully. Its mission is to maintain and limit the temperature of the water at a chosen value.
SETUP WARNING! Never connect the apparatus without it being full of water. It is necessary to completely ‘drain’ the water heater, the tubes and the taps of air that could be inside to avoid disagreeable noises. Before connecting the water heater to the network, fill it completely with water by leaving the hot water tap on.