Pride Mobility Power Glide Basic Operation Instructions page 17

Basic Operation Instructions
PROHIBITED! Avoid exposure to rain, snow, ice, salt, or
standing water whenever possible. Maintain and store in a
clean and dry condition.
MANDATORY! Battery charger for indoor use only.
MANDATORY! Read the battery charging instructions in
this manual and in the manual supplied with the battery
charger before charging the batteries.
Follow these steps to charge the
Power Glide (see figure 8):
1. Place the wheelchair equipped
with the Power Glide near a
standard electrical outlet.
2. Disconnect the black and white
charger harness extending from
the battery pack from the motor
harness.
NOTE: The battery charger is
equipped with an LED that indi-
cates power and the state of
charge. A red LED indicates
power, an orange LED indicates
active charging, and a green LED
indicates that the battery is fully
charged.
3. Connect the charger harness to the black and white connectors on the
power cord extending from the battery pack, then plug the 3-pronged
plug into the electrical outlet.
4. When the battery is fully charged (a green LED will illuminate),
unplug the charger from the electrical outlet and then from the battery
pack.
Figure 8. Battery Charging
www.pridemobility.com
Battery
Pack
To Electrical Outlet
17
Battery
Charger
Power Glide