Before First Use - Pet Stop Universal Remote Training system Owner's Manual

Before First Use

STEP TWO
• Press and hold the ON/OFF button for
one second; there is a small delay to
power up the handheld remote. The
indicator lights will briefly blink.
• Select DOG 1 (left) or DOG 2 (right)
by pressing and releasing the DOG
TOGGLE button.
• Press and hold the DOG TOGGLE button.
The DOG LIGHT will slowly flash red.
5
STEP ONE
Insert one 3.6v lithium ion battery in the back
of the handheld remote with the (+) terminal
facing to the right of the battery compartment.
Insert the second 3.6v lithium ion battery in
the remote receiver with the (+) terminal fac-
ing towards the battery compartment opening.
Using a small coin, replace the battery cap
turning clockwise.
Successful set up will be confirmed
with a flashing green light.
• This setup function only needs to be
performed once. The Universal Remote
will retain the collar's unique code.
• Press and hold the TONE or VIBRATE
functions to ensure proper operation of
the Remote Receiver unit.