Remote Functions - Pet Stop Universal Remote Training system Owner's Manual

Remote Functions

1/2 Second
Stimulation
TONE ONLY
Press and hold the TONE button to activate the warning tone for up to 10 seconds. After
ten seconds the button needs to be released and pressed again to reactivate. Most dog
fence trained pets will respond quickly to only the warning tone without need for ad-
ditional stimulation.
VIBRATION
The VIBRATION function is most often used as a "praise button" or positive reinforcement
for positive behaviors. Providing treats or praise while pressing the vibration button will
help reward your dog for desirable behaviors.
½ SECOND STIMULATION
Press and release to provide a brief ½ second of stimulation from the fencing collar
receiver.
1 SECOND STIMULATION
Press and release to provide a longer 1 full second of stimulation from the fencing collar
receiver for difficult or dangerous situations.
NOTE: The Handheld Remote will emit a long beep and flashing red light
should any command from the Handheld and the remote receiver fail. This
condition is most likely caused by the pet being out of range. Move closer
and attempt again. With a direct line of sight, you can expect the effective
range to be 150 feet.
4
Power Light Indictor
Dog 1
Indicator Light
Tone Only
Function
Dog 2
Indicator Light
Vibration
Function
One Second
Stimulation
On / Off – Press & hold for 2 seconds
to turn handheld remote OFF