AOC L19W661 Service Manual page 9

19'' LCD TV AOC L19W661
This menu allows you to identify the accessory devices you have connected to the external inputs/outputs.
1.Select Source in the Installation menu.
2.Press the cursor right to enter the list, and press up/down key to the selected input.
3.Press OK button to confirm.
Analog Audio In
If your accessory device has a DVI output connector, only the video signal is transmitted in digital format. To input an
audio signal, please connect the analog audio L and R outputs to the TV's L and R AV2 audio input plugs.
Digital Audio Out
In addition to accepting audio input through HDMI, the TV can output Digital audio through the DIGITAL AUDIO OUT
(SPDIF OUT) connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for
Digital Audio In, you can connect it with a single cable to the TV's DIGITAL AUDIO OUT (SPDIF OUT).
AV1
AV1 supports component input.
AV2 (S-video/CVBS)
AV2 supports two source inputs (S-video and CVBS) and automatically search the inputs, S-video is the high
priority.In case you have two inputs and want to show the signal from CVBS, please turn off S-video device or plug off
s-video cable."
Clock
This allows you to use your TV as a clock.
1.Press the MENU button on the remote control.
2.Use the cursor down to select Installation in the Settings menu.
3.Press the cursor right to enter the list, and press up/down key to set the time. (Hour/ minute/ AM or PM)
4.Press OK button to confirm.
9