Page 1
121539D Manufacturer of Dimensions Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL JANUARY 2007 ISO 9001:2000 Certified Company DC to AC Power Inverters OWNERS MANUAL for Model: 12/300 Including Options: I, L and T...
Canadian U.L. Listed for use in Canada. 1. GENERAL 2.05 The inverter is designed to operate any 1.01 Dimensions inverters have been designed 120 VAC, 60 HZ, single phase equipment within and manufactured for many user applications and its power ratings, unless specifically designed for long life.
Page 3
external AC power source is applied to the inverter’s auxiliary fuse to be installed within 18 inches of the AC outlet or its hardwire output. battery. CAUTION: Be sure both the inverter and the 3.05.4 NOTE: Using smaller input cable external AC input circuit breaker or fuse are or longer length will greatly degrade the inverter turned “OFF”...
The actual load draw through the remote switch driver. The TV is plugged into the "switched outlet" is less than .1 amp. The fuse should not be larger and the pink wire is connected to the ignition switch than the amp capacity of the switch or the hookup or relay.
WIRING DIAGRAM Fig # 1 5A Breaker FRONT VIEW REAR VIEW Switched "I" option AC Output Chassis bonding lug DC Input Violet wire Ext. Power Low Battery On/Off Two-pin Green LED Red LED Green LED battery cable Connector On/Off Remote Cable See below Switch...
STATED IN THIS LIMITED WARRANTY. SENSATA TECHNOLOGIES WILL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. WARNING: LIMITAIONS ON USE: DIMENSIONS brand products are not intended for use in connection with Life Support Systems and for Avionic use. Sensata Technologies makes no warranty or representation in connection with their products for such uses.
Need help?
Do you have a question about the 12/300 and is the answer not in the manual?
Questions and answers